BRAND NAME	DESCRIPTION	USE
Sikament FF (T)	A colourless high range waterreducer and superplasticizer for accelerated hardening	Especially suitable for the tiles manufacturing.
Sikament 600	A high range water reducer and set retarding concrete admixture with controlled set retarding effect to produce flowing concrete in hot climate	It can be used as a superplasticizer for flowing concrete in floor slabs, pre-stressed concrete girders, foundation, slender components with packed reinforcement, walls, columns, beams, ceilings etc.
Plastiment BV 40	A versatile and economical concrete plasticizer with wide dosage range for varied applications	It is used wherever high quality structural concrete is required. Its plasticizing effect is particularly useful where exposed surfaces are important, maximum performance is desired, placing conditions are difficult, poor quality aggregates are found, pre-cast elements are produced, piling, etc.
Plastiment R1	A medium range water reducing cum seat retarding concrete admixture with normal plasticizing effect.	It can be used for high quality concrete in difficult condition such as high temperatures, long hual, ready mix concrete and where high quantity dense concrete is required.
Plastocrete Plus	A concrete / mortar admixture in liquid form that acts both as a highly efficient plasticizer and waterproofing compound.	It is recommended for use in structural and mass concrete, particularly for water - retaining structures, such as reservoirs and dams, sewerage works, canals, culverts tunnels, roof slabs, rendering and wherever waterproof concrete is required.
Sigunit L	A liquid cohesion agent and rebound reducer for wet spray-concreting method with momentary gluiging effect.	It is used in producing an economical and high quality wet shortcrete. To produce permanent gunite and shortcrete elements, to secure lose and fragmented rock foundations during mechanical or conventional tunnel construction, to ensure construction pits and sub-terranean excavation, for rock and soil stabilization.
Sigunit Powder I	A ready to use accelearator and waterproofing agent in powder form for use with dry gunite mixes. It allows spraying to take place even on wet surfaces subject to slight infiltration.	It is suitable for dry spray gunite mixes of both mortar and concrete such as those required for tunnels and galleries, securing rockfaces, embankment and excavation, thin section concrete shells, swimming pools, concrete repair work, strengthening concrete structures.
Sika FerroGard 901	An active corrosion inhibitor. It is added to the fresh concrete mix and absorbs in the reinforcement in a very short time.	As corrosion protection agent of steel in the reinforced concrete structures above and below ground. During repair and maintenance of reinforced structures, as treatment of reinforcing steel which is susceptible to corrosion.
Sika Surface Finish	A universal concrete admixture to improve pumpability of lean mixes and to protect pumps & pipes from excessive wear.	It is recommended where concrete mixes with varying fines content, low cement or unsatisfactory aggregate grading with poor water retention and tend to lead to extremely high pump pressure. It facilitates that even secondary raw material such as aggregates derived from excavation or demolition work, may be utilized and concrete made such aggregates can be pumped without excessive energy demand.