APPLICATION |
| |
|
| WINSIL 10 |
- Standard glazing
- Cap beading
- Metal-to-metal joints
|
| |
 |
| WINSIL 20 |
- Perimeter joint sealing
- sanitary - seling of bathtubs, basins etc.
- Ceramic tile sealing
- Curtain wall sealing
- Asbestos and metal sheet cladding
- J-Bolt sealing
|
| |
 |
| SILPRUF / ULTRAPRUF |
- Expansion joint sealing
- Weather sealing in structural glazing application
- Mirror fixing
|
| |
 |
| WEATHERSIL NY |
- Bonding and glazing plastics
- Sealing skylights-domes, atrium, canopies, walkways
- Sealing industrial roofs
- Plastic perimeter joint sealing
|
| |
 |
| ULTRAGLAZE SSG4000 / SSG4400 |
- Structural glazing
- Weather sealing in structural glazing applications
|
| |
| |
APPLICATION INSTRUCTION |
| |
All surfaces to be sealed must be clean, dry and free of lose materials. Use wire brush to remove laitence and other loose materials from concrete De-grease non-porous surface with solvents such as Methyl Ethyl Ketone (MEK), Iso Propyl Alcohol (IPA) etc The use of masking tape is crcommended where appropriate to ensure aneat appearance. Cut cartride thread, screw on nozzle, cut at 450
to the desired bead size. Press lever and pull follower rod plate of the caulking gun and insert the cartridge into the gum. Extrude sealant firmly into joint to ensure complete
contact. Tool the sealant surface with a spatula for a smooth finish. Remove the masking tape immediately after tooling.
|
| |
Estimating Sealant Requirement : Running meters pr 300ml cartridge |
| |
Depth
(mm) |
Width(mm) |
| 2 |
3 |
4 |
5 |
8 |
10 |
12 |
15 |
20 |
25 |
30 |
40 |
60 |
| 2 |
75.0 |
50.0 |
37.5 |
30.0 |
18.8 |
15.0 |
12.5 |
10.0 |
7.5 |
6.0 |
5.0 |
3.8 |
2.5 |
| 3 |
50.0 |
33.3 |
25.0 |
20.0 |
12.0 |
10.0 |
8.3 |
6.7 |
5.0 |
4.0 |
3.3 |
2.5 |
1.7 |
| 4 |
37.5 |
25.0 |
18.8 |
15.0 |
9.4 |
7.5 |
6.3 |
5.0 |
3.8 |
3.0 |
2.5 |
1.9 |
1.3 |
| 5 |
30.0 |
20.0 |
15.0 |
12.0 |
7.5 |
6.0 |
5.0 |
4.0 |
3.0 |
2.4 |
2.0 |
1.5 |
1.0 |
| 6 |
25.0 |
16.7 |
12.5 |
10.0 |
6.3 |
5.0 |
4.2 |
3.3 |
2.5 |
2.0 |
1.7 |
1.3 |
0.8 |
| 8 |
18.8 |
12.5 |
9.4 |
7.5 |
4.7 |
3.8 |
3.1 |
2.5 |
1.9 |
1.5 |
1.3 |
0.9 |
0.6 |
| 10 |
15.0 |
10.0 |
7.5 |
6.0 |
3.8 |
3.0 |
2.5 |
2.0 |
1.5 |
1.2 |
1.0 |
0.8 |
0.5 |
|
| |
Typical Joint Dimension |
| |
Joint
|
Dimensions |
Coverage, Running meters per 300 ml cartridge |
Width(mm) |
Depth(mm) |
| Glass-to-Glass butt joint |
4 |
3 |
25.0 |
| Aluminium-Glass joint |
4 |
3 |
25.0 |
| Polycarbonate glazing |
4 |
3 |
25.0 |
| Bathtub/basin perimeter |
4 |
4 |
18.8 |
| Window perimeter |
4 |
4 |
18.8 |
| Metal cladding |
4 |
4 |
18.8 |
| Asbestos roof lap joint |
4 |
4 |
18.8 |
| Mirror primeter sealing |
4 |
4 |
18.8 |
| Weather sealing |
4 |
4 |
18.8 |
| Pre-cast concrete joints |
6 |
4 |
12.5 |
| Structural glazing |
6 |
6 |
8.3 |
| Expansion joints |
25 |
10 |
1.2 |
|
| |
| |
|
Properties and Technical Data |
| |
Property
|
Property Singificane
|
Winsil 10
|
Winsil 20
|
Weathersil NY |
Silpruf
|
Ultrapruf
|
Ultraglaze SSG4000 |
Movement Accomadation
|
Sealants ability to accomadate the required design movement. |
+ 25 %
|
+ 25 %
|
+ 25 %
|
+ 25 %
|
+ 25 %
|
+ 25 %
|
| Maximum Joint Diementsion
(width depth) |
Greater design flexibility
|
25mm x 6mm
|
25mm x 6mm
|
25mm x 6mm
|
60mm x 10mm
|
60mm x 10mm
|
25mm x 10mm
|
ToolingTime
(@27°c and 50 % RH)
|
Timetaken by sealanttoformaskin on the surface of the bead |
5-8 min
|
5-8 min
|
10 min
|
30 min
|
30 min
|
30 min
|
Tack free Time
|
Time taken by sealant to before it can
withstand incidental touch |
20 min
|
25 min
|
20 min
|
4-6 min
|
3 hours
|
2-4 hours
|
Cure time
(@27° c and 50% RH]
|
Timetaken by selant to develop its
full properties |
1-5 days
|
1-5 days
|
1-5 days
|
5-10 days
|
7 days
|
7-14 days
|
Application
Temp range
|
Broad application temperature range
extends practical working time |
-30oC to +60oC
|
-30oC to +60oC
|
-30oC to +60oC
|
-30oC to +60oC
|
-30oC to +60oC
|
-30oC to +60oC
|
Service Temp range
|
Temperature range over which sealant
is expected to maintain elasticity |
-40oC to +100oC
|
-40oC to +100oC
|
-50oC to +100oC
|
-50oC to +100oC
|
-50oC to +100oC
|
-60oC to +90oC
|
Hardness
|
Influences movement capapbility and long
term performance.Greater hardness limitsmovements capability and long term performance |
22 shore A
|
22 shore A
|
20 shore A
|
20 shoreA
|
25shoreA
|
37 shore A
|
| Tensile Strength |
Inherent sealant strength, Higher tensile stenght ideal for structural glazing application |
1.2 mpa
|
1.5 mpa
|
1.2 mpa
|
1.6 mpa
|
1.6 mpa
|
2.1 mpa
|
Cure Chemistry
|
Substract compatibility decisisions |
acetoxy
|
Neutral
|
Neutral
|
Neutral
|
Neutral
|
Neutral
|
| Colour Range |
Wide choice based on substrates |
Translucent Black, White, Gray,lvory |
Translucent Black, White
|
Translucent Black, White
|
Black, White, Gray,
|
Black
|
Black
|
|
| |
|
LIMITATION |
| |
SHicone construction sealants are not recommended for underwater applications. Painting over silicone sealants is not recommended.
Limited Warranty: GE Bayer Silicones warrants that its product will conform to GE Bayer Silicone's internal specifications at the time of application or use,
provided that the product is stored in accordance with GE Bayer Silicone's recommendations and applied before the earliest of
(1) the "Use Before Date" indicated on the product package,}
(2) one year from date of shipment, or
(3) expiration of such other period or recommended storage time stated in tFflfc
Bayer Silicone's literature for the product.
If notified in writing of a claim within six months of the products use or application, GE Bayer Silicone's will, at its
option, replace or refund the purchase price of any GE Bayer Silicone's product which does not satisfy the foregoing warranty.
The foregoing shall constitute the sole and exclusive remedy for defects or failure of the product, and the sole and exclusive liability of GE. The warranties
stated above are in lieu of all other warranties, written or oral, statutory, express or implied, including any warranties of merchant ability or fitness for
purpose.
Limitation of Liability : GE Bayer Silicones shall, in no event, whether the claim is based on warranty, contract, tort, strict liability, negligence or
otherwise, be liable for incidental or consequential damages, or for any damages in excess of the amount of the purchase price. |
|
